Uniden WDECT3355, WDECT3355 Cordless Telephone User Manual


 
[ 51 ]
Voice memo
The voice memo function allows the user to record messages (more than 2
seconds and within 4 minutes).
1) Press and hold
memo record. You hear a beep.
2) Start your recording after the announcement “Record Memo Message” and a
confirmation tone. The message counter displays “- -”.
3) When you have finished, press
memo record, play/stop, or SET to
stop recording.
The system returns to standby.
Recording a conversation
You can record a conversation from the handset or the base (more than 2
seconds and within 10 minutes).
From the handset
1) During a conversation using the handset, press /del on the handset.
2) Press
/vol/ or /vol/ to select Call Record, and then press .
Recording a Call appears on the handset, and “- -” flashes on the base.
A confirmation tone, that can be heard by both parties, sounds during recording.
3) To stop recording, press
/del and /vol/ or /vol/ to select Call
Record, and then press . You will hear a confirmation tone.
From the base
1) During a conversation using the base speaker phone, press and hold memo re-
cord on the base until you hear a confirmation tone. The unit begins recording
and “- -” flashes on the display. A confirmation tone, that can be heard by both
parties, sounds during recording.
2) To stop recording, press
play/stop or memo record. You hear a
confirmation tone.
• The voice memo
messages are recorded
as an incoming
messages.
• When the answering
system is full, FL
appears on the display
and recording
is terminated.
• If an outside call is
received during the
operation, the operation
is canceled.
• Every state has different
regulations governing
the recording of
conversations over the
telephone. Make sure to
check your local, state
and federal laws before
using this product to
record any telephone
conversation in order to
determine that your use
is in compliance with
such laws or guidelines.
You cannot record
3-way or intercom
conversations.
• When the answering
system becomes full,
FL appears on the
display and recording
is terminated.