Filter
Top Products
[ 13 ]
Entering the Menu
1) Press the /del key in standby mode.
2) Use /vol/ or /vol/ to move the pointer to a
desired main menu (DirectLink Mode, Room Monitor,
Handset Setup, Answ. Setup, Global Setup, and
System Reset).
3) Press to select the desired main menu.
4) Use /vol/ or /vol/ to select a desired submenu, and then press
to enter.
In the submenu, use /vol/ or /vol/ to select an item. Press to
confirm your selection. For detailed instructions, see the following sections for the desired
submenu.
5) To exit the menu, press or return the handset to the cradle.
DirectLink Mode
Entering the Two Way Communication between the Handsets
Anywhere without the Base
1) Enter the DirectLink Mode menu (see “Entering the Menu”
above). To enter DirectLink mode press
[SELECT] appears.
2) Press to enter the DirectLink mode. You will
hear a confirmation tone, and DirectLink Mode Complete
appears.
To adjust ringer volume, press /vol/ or /vol/ to select one of three ringer
volume (off, low, or high).
3) To return back to the normal mode, exit the DirectLink mode. Press /del, and
then , or return the handset to the cradle. DirectLink Mode Cancel appears.
To enter
DirectLink mode
press [SELECT]
SETTING UP THE MENU
DirectLink Mode
Room Monitor
Handset Setup
To go back to the
previous screen,
press /
del.