Filter
Top Products
[ 12 ]
Global Setup
If you change one of the Global settings, you change the setting for all additional
handsets. Only one handset can change Global settings at a time.
Submenu name Description
Name Tag (POP ID) Display the stored name with the Caller ID telephone number, if the displayed
(Default is on) Caller ID telephone number is exactly the same as a number stored in the
phone book (see page 18).
Insert 0 Add “0” or “00” to the number, when you receive the Caller ID message
(New Zealand only) (see page 18).
Day & time Set the day and time of your display (see page 18).
Dial Mode Set the dial mode to tone or pulse (see page 19). Most phone systems use
(Australia only) tone dialing, which send DTMF tone through phone line. The
(Default is tone) default is tone dialing.
Depends on your dialing system, set the dial mode.
Copy Phonebook Allow you to transfer the phonebook data stored in one handset to another
handset (see page 19).
System Reset
System Reset is used to clear the handset’s ID from the main base unit,
or the base ID from the handset.
Submenu name Description
Deregister HS Clear the handset ID from the base. Use this option, for example, when you
change the digital security code (see page 20).
Replacing Base Clear the base ID. Use this option, for example, if you wish to deregister the
base to use the handset with another base of the WDECT3315 and
WDECT3355 series (see page 20).