Filter
Top Products
[ 28 ]
FLASH AND CALL WAITING
FIND HANDSET
If you have Call Waiting service and a call waiting tone sounds
during a call:
AUSTRALIA:
Press on the handset or flash on the base,
then press 2 to switch between callers.
NEW ZEALAND:
Press on the handset or flash on the base to switch
between callers.
To locate the handset, press mute/find handset on the base
when the base is in standby mode. All registered handsets
beeps for 60 seconds, and Paging appears on the handset
display. To cancel paging, press any key on the handset or
mute/find handset on the base.
When speaking on the base
1) Press or speaker on the handset to initiate
the 3-way conversation.
2) To hang up, return the handset to the cradle, or press
key on the handset. The base will still be connected to the
call.
NEW MESSAGE LED
The new message LED on the handset flashes when you have new messages in
your answering system. The LED stops flashing when all new messages are played
back (see “Using your Answering System” on page 49).