Filter
Top Products
[ 26 ]
TONE DIALING SWITCH-OVER (AUSTRALIA ONLY)
Some telephone companies use equipment that requires
pulse dialing (sometimes referred to as rotary dialing).
If you need to enter tone dialing digits, you can switch-
over to tone dialing during the call. This feature is useful
when you need tone dialing to use automated systems,
for example, entering your bank account number after
you have called your bank.
Initially make your call with the pulse dialing mode.
Once your call connects, press
tone
(or
tone
on the base). Enter the
desired number. These digits will be sent as tone dialing.
Once the call ends, the tone mode is canceled and pulse dialing mode resumes.
• The tone feature
only applies when
the dial mode is set
to pulse.
• This special
number can be
stored in a memory
location. This is
referred to as Chain
Dialing (see page
36)
TRAVELING OUT-OF-RANGE
During a call, as you begin to move your handset too far from your base unit,
noise may increase. If you pass the range limits of the base unit, you will hear
a beep and see Out of Range on the display, and then the handset returns
to standby mode. You may return to the call if you move your handset within
the range limits of the base and press or speaker within 30
seconds.
If you encounter interference while using your phone, you can manually improve
the sound by setting the Clarity Booster to on. This works only when the phone
is in use.
CLARITY BOOSTER