Filter
Top Products
[69] MULTI-HANDSET FEATURES
www.uniden.com
Using the Room/Baby Monitor
This feature allows you to monitor
sounds in another room. Place the
station in the room you wish to
monitor; it will function as a
microphone. A second station can be set
to function as a remote speaker,
allowing you to monitor sounds in the
room.
Using Room/Baby Monitor
1) Press the center of the joystick or the
MENU soft key on the base and select
the Room Monitor menu.
2) Select the station you want to monitor.
3) Press the SELECT soft key (or the OK soft key).
You hear sounds in the room where the station is installed.
4) To turn off the Room Monitor, press end.
To prevent the monitoring of a particular handset, go to System Setup and, select
Handset from the handset menu; then select
4QQO/QPKVQT
and choose
QHH
. You will
hear a confirmation tone.
You cannot prevent the base from being monitored.
•This feature only works
when the handset(s) is
within the range of the
base.
•If the party is out of
range,
7PCXCKNCDNG
appears in the display,
and the operation will
be canceled.
•While a handset is
monitoring or being
monitored, it cannot
make or receive calls.
Other handsets can
still make and receive
calls.
note
MULTI-HANDSET FEATURES
UP771BH.book Page 69 Tuesday, August 2, 2005 9:06 AM