Filter
Top Products
GETTING STARTED [16]
www.uniden.com
Registering Expansion Handsets
Handsets supplied with the phone are registered to the base by the factory. When
you register an extra handset to the base, the handset ID will be assigned.
Before the expansion handset is registered, the battery pack MUST be charged for
15-20 hours.
To register expansion handsets, follow the steps below:
1) Make sure the main base is in standby mode.
2) On the base, press the MENU soft key, and then select
*54GIKUVTCVKQP
.
3) On the handset, press and hold # until you will hear a beep.
4) Press the OK soft key.
5) While the handset is registering,
*CPFUGV4GIKUVGTKPI
will appear in the Handset
LCD. When
4GIKUVTCVKQP%QORNGVG
is displayed, the handset has been registered
to the base. If
4GIKUVTCVKQP(CKNGF
appears, please try these steps again.
If a handset has ever
been registered to a
different base, you
must de-register the
handset before you
can register it to the
new base (see page
17).
note
GETTING STARTED
UP771BH.book Page 16 Tuesday, August 2, 2005 9:06 AM