Filter
Top Products
MULTI-HANDSET FEATURES [68]
www.uniden.com
Multi-Handset Features
The features in this section require a minimum of two handsets to operate. To add
additional handsets to your system, see "Expanding Your Phone" on page 15.
Using DirectLink Mode
In DirectLink Mode, a pair of handsets can function as two-way radios.
DirectLink Mode does not interfere with the base's ability to make or
receive telephone calls. You must set both handsets to DirectLink
Mode to make a directlink call.
To enter DirectLink mode, select the Direct Link option from the main
menu, and then press the ENTER soft key.
&KTGEV.KPM/QFGEQORNGVG
.
appears once the selection is confirmed.
To make a DirectLink call, press the DirectLink soft key. Select
the handset you want to call. To answer a DirectLink call, press
talk/flash or if Any Key Answer is on, press any number key,
*
/
tone or #. Press end when you want to hang up.
To exit DirectLink mode and be able to receive normal phone
calls again, press the CANCEL soft key, and then press the OK
soft key.
5'.'%6
&KTGEV.KPM
•If the party is out of
range,
0Q5KIPCN
appears in the display,
and the operation will
be canceled.
•While a pair of
handsets are in
DirectLink mode, they
cannot be used to
make or receive calls.
Other handsets can
still make and receive
calls.
note
MULTI-HANDSET FEATURES
UP771BH.book Page 68 Tuesday, August 2, 2005 9:06 AM