Filter
Top Products
BASICS [50]
www.uniden.com
Using One Touch Voice Mail Access
The UIP1869V provides one-touch access to Vonage's voice mail
service. When you sign up for voice mail with Vonage, you will receive
an email containing a specially-assigned phone number and access
code for your voice mail.
Follow the steps below to program the Vonage phone number and
access code into the base and any handset(s):
From the handset, go to System Setup, and choose Handset.
1) From the base, press the MENU soft key, then choose Base Setup.
2) Scroll down and select Edit Voice Mail.
'FKV8AOCKN0Q
appears in
the display.
3) Enter the voice mail phone number sent to you by Vonage.
4) Enter a single pause.
5) Enter the four-digit access code sent to you by Vonage.
6) Press the OK soft key.
When you have new messages, the New Message LED will flash. To retrieve your
messages, simply press the soft key. If you have not entered the access number
or it has been deleted, when you press the soft key,
0Q0WODGT5VQTGF6QUVQTG
PWODGTRTGUU=/'07?
appears and you will hear a beep. The phone returns to standby
mode.
Resetting the New Message LED
If the LED remains on after you've retrieved your messages, you may need to reset
the indicators. To reset the New Message LED, press and hold find handset for 5
seconds.
The Voice Mail tone is
pre-programmed to
support Vonage voice
mail service. Do not
alter this setting.
note
System Setup
Handset
Edit Voice
Mail
BASICS
UP771BH.book Page 50 Tuesday, August 2, 2005 9:06 AM