Filter
Top Products
GETTING STARTED [18]
www.uniden.com
When the base information is deleted, the handset displays
/756RNCEGVJGJCPFUGVKPDCUGVQTGIKUVGT/QFGNUOC[XCT[
TGHGTVQ1YPGTU/CPWCNHQTJGNR
. Re-register the handset to the
base (see page 16).
Installing the Beltclip
To attach the beltclip
Insert the beltclip into the holes on each side of the handset.
Press down until it clicks.
To remove the beltclip
Pull either side of the beltclip to release the tabs from the holes.
Optional Headset Installation
Your phone may be used with an optional headset.
To use an optional headset, insert the headset plug into
the headset jack. Your phone is ready for hands-free
conversations. (Headsets may be purchased by calling
Uniden's Parts Department. See back cover page.)
4GRNCEKPIDCUG
;GU
0Q
5'.'%65'.'%6
GETTING STARTED
UP771BH.book Page 18 Tuesday, August 2, 2005 9:06 AM