Uniden UIP1869V Cordless Telephone User Manual


 
[11] GETTING STARTED
www.uniden.com
5) Use the included AC adapter to connect the
POWER port to a 120 Vac continuous power
outlet.
CAUTION
To avoid risk of fire or electrical hazard,
use ONLY the included AC adapter!
All the LEDs will flash several times, and
the Power LED will remain on. If the
UIP1869V was properly recognized by
Vonage's network, the Phone 1 LED will illuminate. Test your connection by making
a call with the corded handset and browsing to a web page from your PC. If you
have any difficulty, see the Troubleshooting section.
Configuring Your UIP1869V (PPPoE users only)
If you use PPPoE to connect to the Internet (common for DSL users), your
broadband service provider assigned you a user name and password. You will need
to enter this user name and password into the UIP1869V. The UIP1869V can take
the place of any additional PPPoE software you received from your ISP, allowing you
to establish and maintain your broadband connection without running any extra
programs on your computer.
Follow the steps below to configure the UIP1869V to use a PPPoE-based connection.
1. Make sure your computer is directly connected to the UIP1869V's LAN port.
2. On your computer, open an Internet web browser window.
GETTING STARTED
UP771BH CH08 GetStart.fm Page 11 Monday, September 5, 2005 11:38 AM