Filter
Top Products
[35] GETTING STARTED
www.uniden.com
Customize Your Own Distinctive Ringer Tones
Your handset can store up to 5
different recordings (a total of
100 seconds) to use as ringer
tones. Each recording must be
less than 20 seconds long.
Storing Ringer Tones
1) Connect the audio recording cable to the handset and sound source (e.g.stereo
or CD player). Insert one end of the audio recording cable into the handset's
headset jack and the other end into the sound source. You can also simply use
the handset's microphone by holding the handset close to the sound source.
2) Go to
4GE'FKV4KPIU
.
3) Select a location from 1-5, and press the OPTIONS soft key.
4) Select
4GEQTF
. To start recording, press the RECORD soft key.
The message counter displays
and then begins to count
down.
5) When you are finished recording, press the STOP soft key. The
phone will play the recorded ringer. To re-record the ringer, press
the ReRec soft key while playing the ringer.
6) Enter the title of this ringer (up to 12 characters).
7) Press the center of the joystick. You will hear a confirmation tone, and
&QPG
appears.
To the
sound source
To the
headset jack
4GEQTF4KPIGT
9CKVKPIVQ
4GEQTF
4'%14&
Ringer Options
Rec/Edit
Rings
GETTING STARTED
UP771BH.book Page 35 Tuesday, August 2, 2005 9:06 AM