Filter
Top Products
Q
UICK
R
EFERENCE
G
UIDE
INSTALL THE HANDSET BATTERY
Remove the cover.
Connect the battery
pack connector with
the correct polarity.
Replace the cover.
PLUG INTO AC POWER
Plug the AC adapter cord into the base
unit and then to a 120V AC outlet.
Place the handset in the base .
CONNECT TO A PHONE LINE
When the handset battery pack is fully charged,
plug the telephone cord into the base unit and
then into a telephone wall jack.
Your phone is set for tone dialing. If your local
network requires pulse dialing, please see
“Setting up the phone, Choose the dialing mode”
in your owner’s manual.
TO SELECT CALLER ID OPTIONS
Press
menu/mute
.
Press
+ or - to move the pointer to
“
Caller ID Setup”, then
press
select/ch.
Press
+
or
-
to move the pointer to an
option, then press
select/ch
.
Press
+
or
-
to change the
option setting.
Press select/ch and return the
handset to the base.
TO CHOOSE THE LANGUAGE
Press menu/mute.
Press
+ or - to move the pointer
to “
Language”, then
press
select/ch.
Press
+ or - to change the
option setting.
Press
select/ch and return the handset
to the base.
TO TURN THE ANSWERING
SYSTEM ON/OFF
Press ans on/off to turn On the system. To turn
Off the system, press
ans on/off again.
TO SET GREETING MESSAGE
Press and hold greeting.
Start recording your message. Position
yourself as near to the base as possible.
When finished, press
greeting
or .
Note:
You must charge the battery pack
continuous
for 15-20 hours
before using the phone.
Note: Three Caller ID options
are available: Auto Talk, Caller
ID on Call Waiting (CIDCW) and
Area Code.
Step 1 Charging the Battery Step 4 Setting Up
Answering System
Step 2 Connecting
Step 3 Setting up the Caller
ID Options/Language
QUICK REFERENCE GUIDE [ 5]
UC777BH(TRU4485) OM 4/9/02 1:45 PM Page 5