Filter
Top Products
THE INTEGRATED ANSWERING DEVICE[ 50 ]
Command Function
# then 1 Repeat a Message
# then 2 Playing incoming Messages
# then 3 Skipping a Message
# then 4 Deleting a Message
# then 5 Stop Operation
Command Function
# then 6 Answering System On
# then 7 Memo Record/Stop *
# then 8 Greeting Message Record/Stop *
# then 9 Answer System Off
# then 0 Help Guidance
You can operate your answering system from a remote location using any touch-tone
telephone or the handset.
Remote access away from home
You can check, play, or delete messages, even record a new greeting message when you
are away from home. Additionally, you can turn On or Off your answering system from a
remote location.
Remote Operation
• You must enter a command within 15 seconds of entering command waiting mode or the answering
system automatically hangs up and returns to standby.
• The system will only playback messages for four minutes and then it returns to command waiting
mode. To continue playing your messages, press
# then 2 again within 15 seconds.
•
If you enter an incorrect PIN code three times, you will hear a beep and the system will return to standby.
• During the remote operation, “” appears on the base.
1) Call your telephone number.
2) During the greeting message, press # and enter your PIN code within 2 seconds.
(See “Setting a Personal Security Code”, page 44).
3) The answering system announces the current time and the number of messages stored
in memory. You hear “To play incoming messages, press pound two. For help, press
pound zero”. You will hear intermittent beeps.
4) You may select a command from the following chart:
For your convenience
a remote operation
card is provided for
you to use while away
from home (refer to
page 67).
*For Memo Record and Greeting Message Record function, the first time you enter the
corresponding command, it starts the Recording function. If you want to stop the recording,
press # then 7 or 8.
UC777BH(TRU4485) OM 4/9/02 1:48 PM Page 50