Filter
Top Products
[ 23 ]
BASICS
Find Handset
BASICS
Selecting a Different Channel
If you encounter interference while using your phone, you can manually change the phone’s
channel for clear operation. This function works only when the phone is in use.
Press select/ch. “Scanning” appears on the display, indicating the phone is changing to
another channel. For more information on interference, refer to “Radio Interference” on page 64.
• If the handset battery
is completely drained,
the handset will not
beep when paging.
To locate the handset, press find handset/transfer on the
base. The handset beeps for 60 seconds, and “Paging”
appears on the handset display.
Paging is canceled when pressing any key on the handset or
find handset/transfer on the base. Additionally, if you
receive an incoming call, page is canceled.
3-Way Conferencing
The Uniden TRU4485 series permits 3-way conversations between the
handset, base, and an outside line.
When speaking on the handset
1) Press (talk) on the base to initiate the 3-way conversation.
2) To hang up, press (talk) on the base. The handset will still
be connected to the call.
When speaking on the base
1) Press talk/flash on the handset to initiate the 3-way conversation.
2) To hang up, return the handset to the base, or press
end on the
handset. The base will still be connected to the call.
• If you press
xfer/del on the
handset during the
3-way conversation,
you will hear a beep.
• During the 3-way
conversation, all the
base keys except
(talk), volume
, and
mute
are disabled.
UC777BH(TRU4485) OM 4/9/02 1:46 PM Page 23