THE INTEGRATED ANSWERING DEVICE [ 49]
THE INTEGRATED
ANSWERING DEVICE
• The voice memo
messages are
recorded as
incoming messages.
• When the answering
system is full, “”
appears on the
display and recording
is terminated.
• If there is an
incoming call, or if
you press
talk/flash
on the handset or
(talk) on the
base, the operation
will be canceled.
Voice memo
The voice memo function allows the user to record messages (more than 2 seconds and
within 10 minutes).
1) Press and hold memo. You hear a beep.
2) Start your recording after the announcement “Record memo message” and a
confirmation tone. The message counter displays “”.
3) When you have finished, press memo or to stop recording. The system returns
to standby.
Recording a conversation
You can record a conversation while you are using your phone (more than 2 seconds
and within 10 minutes).
1) During a conversation from the handset, press and hold memo on the base. The unit
begins recording and “” flashes on the message counter.
A beep, that can be heard by both parties, sounds during recording.
2) To stop recording, press or memo. You hear a confirmation tone.
• A recorded
conversation is
treated as a typical
message and will be
added to the
stored messages.
• You cannot record a
3-way conversation
or a conversation
using the
speakerphone.
UC777BH(TRU4485) OM 4/9/02 1:48 PM Page 49