Filter
Top Products
BASICS[ 22 ]
Mute Microphone
• The tone feature
only applies when
the dial mode is set
to pulse.
• This special number
can be stored in a
memory location.
This is referred to
as Chain Dialing.
(See page 33.)
You can temporarily turn Off the microphone so that the person you
are talking with cannot hear you.
With the handset
During a telephone call press and hold menu/mute to turn Off the
microphone, and “Mute” appears on the display. Press menu/mute
again to cancel muting.
With the base
During a telephone call press mute on the base to turn Off the
microphone. Press mute again, or press (talk) to cancel muting.
Tone Dialing Switch-over
Some telephone companies use equipment that requires pulse dialing (sometimes
referred to as rotary dialing). If you need to enter tone dialing digits, you can
switch-over to tone dialing during the call. For example, entering your bank
account number after you have called your bank.
Initially make your call with the pulse dialing mode. Once your call
connects, press
*
tone. Enter the desired number. These digits will be
sent as tone dialing. Once the call ends, the tone mode is canceled
and pulse dialing mode resumes.
Traveling Out-of-Range
During a call, as you begin to move your handset too far from your base unit, noise increases.
If you pass the range limits of the base unit, your call will terminate within 30 seconds.
• If you press end to
cancel muting, the
call is disconnected
and the phone
will return to
standby mode.
• If you press
find
handset/transfer
while muting, the
muting is canceled.
UC777BH(TRU4485) OM 4/9/02 1:46 PM Page 22