Filter
Top Products
BASICS[ 24 ]
Transferring a Call
To transfer from the handset to the base
1) Press xfer/del on the handset during a call. The call will
automatically be placed on hold and the transfer tone sounds
on the handset and the base.
2) Press (talk) on the base to receive a transferred call. The
handset will return to the standby mode. To cancel the transfer,
press xfer/del or talk/flash.
• If you transfer a call and it is not picked up after 5 minutes, the call will be disconnected.
The handset returns to the standby mode.
• Returning the handset to the base will not cancel the transfer.
• When the handset is Off the base, and if you place the handset On the base while the
transfer tone sounds, you can receive a transferred call by picking up the handset (When the
AutoTalk is On).
• If you press
xfer/del (or find handset/transfer) while muting, the muting is canceled.
To transfer from the base to the handset
With the find handset/transfer key
1) Press find handset/transfer on the base during a call. The
call will automatically be placed on hold and the transfer tone
sounds on the handset and the base.
2) Press talk/flash on the handset. (Pick up the handset from the
base, or press the number keypad,
*
tone, or # (when the
AutoTalk is On)). The transfer tone stops. To cancel the transfer,
press find handset/transfer or (talk) on the base.
• While transferring a
call, keys on the base
except
(talk) and
find handset/transfer
are disabled.
• While transferring a
call, keys on the
handset except
talk/flash and
xfer/del are disabled.
UC777BH(TRU4485) OM 4/9/02 1:46 PM Page 24