Filter
Top Products
PHONEBOOK[ 34 ]
Memory Dialing (base only)
You can store 10 phone numbers in the base, and make calls with memory dialing
from the base.
Storing Phone Numbers
1) Press memory in the standby mode.
2) Enter the number you wish to store. (The number cannot exceed 20 digits.)
3) Press
memory. Enter the memory location number (0-9) on the keypad.
A confirmation tone sounds.
Making Calls with Memory Dialing
1) Press (talk) in the standby mode.
2) Press
memory. Enter the memory location number (0-9) to dial the number.
Deleting the Stored Data
1) Press memory in the standby mode.
2) Press
memory again.
3) Enter the memory location number (
0-9) you wish to delete. You will hear a
confirmation tone.
• The 10 memory locations in the base are independent from the handset.
• The pause key counts as one digit. Pressing
redial/pause more than
once increases the length of pause between numbers.
• If you have not
pressed any key for
30 seconds, the
phone returns to the
standby mode.
• If you get an
incoming call, the
operation is canceled.
• If you select a
memory location that
does not have a
stored number, the
base will beep rapidly
and the phone will
not dial.
UC777BH(TRU4485) OM 4/9/02 1:47 PM Page 34