Filter
Top Products
69
When the firmware starts updating “Downloading Firmware...” is displayed.
When the firmware file has been downloaded into RAM on the UIP300G,
the checksum calculation starts.
When the checksum calculation has finished, the old firmware is erased
(the second line of the display indicates the sector of the flash being erased).
After the old firmware has been erased, new firmware programming starts
(the percentage of progress is displayed on the second line of the display).
Downloading Firmware...
uip300_enc_ge100.ftp
Calculating Checksum...
Please Wait
Erasing Flash...
5/20
Programming Flash...
75% Completed
When programming is completed, the following message is displayed and the
telephone restarts automatically.
Firmware Update
Completed