Uniden UIP300G IP Phone User Manual


 
13
Chapter 2 Installation and Basic Setup Instructions
General Information
This chapter provides instructions for installing the foot stand on the UIP300G,
connecting the UIP300G to the LAN and sample setup instructions for setting up
the telephone.
Attaching the Footstand to the Telephone
The footstand is included with the UIP300G. The footstand can be attached to
the bottom of the UIP300G, allowing the user to tilt the telephone at either low or
high angle or to wall mount the telephone. The adjustments are clearly marked
on the footstand with arrows indicating the direction that the footstand should be
attached to the bottom of the telephone for the desired height or
wall mounting.
To attach the footstand to the telephone, determine the desired adjustment and
align the tabs on the footstand with the tab receptacles on the bottom of the
telephone by matching the arrows. Press firmly on the footstand to lock the tabs
in place.
Low Desktop High Desktop Wall Mount
Figure 2-1 Footstand Mounting