Filter
Top Products
50
Pressing CANCEL/DEL key returns to the previous menu. To exit programming
and return the telephone to standby mode, press MENU key.
3. Press SELECT key again and enter the Subnet Mask.
The format of the Subnet Mask is:
XXX.XXX.XXX.XXX
\
Numbers 0~255 are valid entries for the Subnet Mask.
4. After the correct Subnet Mask is entered, press SELECT key and restart
the telephone, or press CANCEL/DEL key to cancel restart the phone
and continue setting up the telephone.
• Pressing CANCEL/DEL key returns to the previous menu. To exit programming
and return the telephone to standby mode, press MENU key. If LINE1, LINE2,
SPEAKER/HEADSET are pressed or if the handset is picked up, the telephone
goes off-hook and restart is cancelled. When the telephone restarts, the
network settings are not used until after the telephone has been initialized.
• If the Subnet Mask is not valid, “Invalid Input” is displayed for one second
before returning the display to the Subnet Mask.
• The new Subnet Mask address is not recognized until the telephone has been
reinitialized. Once the telephone restarts, a restart confirmation message is
displayed on the LCD. “Initializing...\” is displayed in the LCD while the
telephone resets.
Default Gateway IP Address
This option is used to read/write the default Gateway IP address.
To read/write the default Gateway IP address:
1. If already in the Network Configuration menu, use the or keys to
access the Default Gateway option.
2. Press SELECT key to display the current Default Gateway.
3. Press SELECT key again and enter the default Gateway IP address.
The format of the default Gateway IP address is:
XXX.XXX.XXX.XXX
Numbers 0~255 are valid entries for the default Gateway IP Address.
4. After the correct Default Gateway IP address is entered, press SELECT
key and restart the telephone, or press CANCEL/DEL key to cancel
restart the phone and continue setting up the telephone.
Network Config:
Default Gateway
4/6