Filter
Top Products
16
5. Once the correct password is entered, the DHCP option is displayed (default
is Disabled). Press SELECT key to access the Disabled screen.
The default password is 654321. If an incorrect password is entered, the
message “Incorrect Password” is displayed for one second. The Password
screen is returned and the password can be entered again.
If using a static IP address, DHCP must be set to Disabled.
If enabled is selected, the IP address, Subnet Mask address and Default
Gateway address cannot be entered.
This selection is not recognized until the telephone has been reinitialized. When
the telephone has been restarted, the LCD shows “Initializing...\” and then
“Searching DHCP Server...”. After initialization is complete, the telephone returns
to the time and date display.
6. Press SELECT key to accept the Disabled option or press to access the
Enable option.
If Disabled is the desired option, press SELECT key. When the “Press
SELECT to Restart” message is displayed, press CANCEL/DEL key to return
to the Network Config menu and configure other network parameters.
If Enabled is the desired option, press SELECT key to accept the option.
When the “Press SELECT to Restart” message is displayed, press
CANCEL/DEL key to return to the Network Config menu , or press SELECT
key to restart the telephone.
Incorrect Password
Network Config:
DHCP Disabled
1/6
DHCP
Disable
1/2
DHCP
Enable
2/2