Filter
Top Products
15
Quick Setup Procedure
This example provides steps for configuring an IP telephone via terminal based
configuration (User interface) and the web browser based configuration. Both the
UIP300G terminal interface and the web browser can be used to modify the
information for the operation of the UIP300G.
The IP terminal network settings must be configured before the web browser
is configured.
Terminal Configuration using the UIP300G
To access the Phone Configuration Menu and set up a telephone configuration:
1. Press MENU key.
2. Use the or keys to access the Configuration menu,
then press SELECT key.
3. Use the or keys to access the Network Configuration menu,
then press SELECT key.
4. When prompted to enter “Password” enter the password,
then press SELECT key.
Setup Menu:
Configuration
3/4
Configuration Menu:
Network Configuration
2/3
Enter Password
******