Filter
Top Products
22
Chapter 3 Basic Operations
General Information
There are several basic operations that the UIP300G performs. Some of the
basic operations include:
• Standby
• Originating a Call
• Receiving a Call
• 2-line Operation
• Setting the Volume
Telephone Operations
Standby
When the telephone is powered on, “Initializing...\” is shown while the
telephone is starting up. The last character on the LCD rotates, indicating that
the software is still running.
Before the telephone switches to standby mode, the firmware version is shown
on the LCD for five seconds (below is an example for the firmware version 1.00).
Initializing...\
Firmware Version: gel.00