Filter
Top Products
Using Your EXP 9100 Memory
Storing a Number
1. Remove the Handset from the Base Unit
2. Press
MEMO
(The
TALK
LED lights and you hear a beep.)
3. Enter the number (up to 16 digits) you want to store.
You may enter a delay between numbers (for accessing a switchboard,
or long distance service) by pressing
RDL/P
at the point in the number
sequence you wish to pause. (
Note:
The
RDL/P
button counts as one
digit.
)
Pressing
RDL/P
more than once will increase the length of the
pause between numbers.
4. Press
MEMO
and a number
(01-20)
for the memory location.
After pressing
MEMO
the second time, you have 20 seconds to
enter the number you wish to store. Otherwise, an error tone will
sound and the unit returns to stand-by.
You will hear a confirmation beep and the
TALK
LED goes out.
5. Write the stored number and its memory location number on one of the
enclosed stickers.
Example: Store 555-1234 in memory location 12:
a. Press
MEMO
b. Press
5551234
c. Press
MEMO
d. Press
12
The Handset beeps confirmation and the
TALK
LED goes out.
Storing a One-Touch Dialing Number:
1. Follow steps 1 - 3 above in “Storing a Number,” then:
2. Press
MEMO
and the
ONE-TOUCH DIALING
button (
A, B,
or
C
) you wish to
program. The Handset beeps confirmation and the
TALK
LED goes out.
Example: Store 555-1234 in One-Touch button B:
a. Press
MEMO
b. Press
5551234
c. Press
MEMO
d. Press
B
Handset beeps confirmation and the
TALK
LED goes out.
17