Filter
Top Products
Answering a Call
1. The Handset rings and the green
TALK
LED and Keypad Lights flash.
2. If the Handset is not in the Base Unit, press
TALK
to answer the call.
3. If the Handset is in the Base Unit, the
AutoTalk
feature allows you to
answer the call by simply picking up the Handset and beginning your
conversation.
4. When you finish the call, place the Handset back on the Base Unit.
AutoStandby
automatically hangs up the phone. There is no need to
press
TALK
to hang up.
—OR–
If the Handset is away from the Base Unit, press
TALK
to hang up the
phone.
Making a Call
1. Remove the Handset from the Base Unit
2. Press
TALK.
NOTE: The
TALK
LED flashes and there is a slight delay while the Spread
Spectrum Technology in your
EXP 9100
sets up a digital link
between the Handset and the Base Unit.
3. When the
TALK
LED glows steadily and you hear a dial tone, dial the
number you are calling by pressing the numbers on the keypad or using
one of the memory features (See “Using Your EXP 9100 Memory.”)
4. When you finish the call, place the Handset back on the Base Unit.
AutoStandby
automatically hangs up the phone. There is no need to
press
TALK
to hang up.
—OR–
If the Handset is away from the Base Unit, press
TALK
to hang up the
phone.
Dialing a Stored Number
1. Remove the Handset from the Base Unit
2. Press
TALK
.
3. Press
MEMO
and the memory number
(01-20)
for that number.
-OR-
Press the
ONE-TOUCH DIALING
button for that number.
4. Your EXP 9100 will then dial the previously stored number.
(To store a number, refer to “Using Your EXP 9100 Memory.”)
NOTE: If you select a memory location that does not have a stored number,
the Handset will beep rapidly and the phone will not dial.
15