Filter
Top Products
74
Weather Scan
Press Channel to hold on any channel/frequency. Press Func then press and hold 6(WX).
The scanner starts scanning the preprogrammed weather frequencies and stops on the rst good
signal. If the signal is lost, the scanner resumes searching for another weather transmission.
Change Channel
Turn the Scroll Control.
Attenuation
Press Func then 4(ATT).
Intermediate Frequency Exchange
Press Channel to hold on any frequency. Press Func then 7(IFX) to toggle on or off.
Replay the Last Transmissions
Recording starts when the scanner receives an Alert in Weather Alert.
Press Replay.
Press Channel to pause/resume replay.
Turn the Scroll Control to select recordings.
Quick Search
Press Func then E/yes to start Quick Search at the current frequency.
Weather Menu
Press Func then Menu.
WEATHER ALERT
This setting turns on weather alert and determines which types of signals will trigger an alert. See
also Program SAME.
Press Channel to hold on any channel/frequency.
Press Func and then press and hold 6(WX). Press Func then Menu.
Scroll to Weather Alert and press E/yes.
Alert Only - The scanner will scan all the weather channels and immediately sound a
weather alert siren when it detects the 1050 Hz weather alert tone. Press any key to stop the
siren which opens the squelch and the scanner remains on the weather channel.
SAME 0-4 - The scanner sounds a weather alert siren for any programmed county(ies). The
scanner displays warning level as “Warning WX”, “Watch WX” or “Advisory WX” and it
displays decoded Event Code.
When an alert is received, press any key to listen to the alert.
All FIPS - The scanner sounds a weather alert siren for any county.