Filter
Top Products
36
Review/Edit System Add Current dB Channels
Set FL Quick Key Rename
Set FL Number Tag Delete
Det FL Startup Key Information
Use Location Control
Review Avoids
Stop All Avoiding
Review/Edit System – See Programming Systems.
Set FL Quick Key – This assigns a quick key to the Favorites List and will scan the list when the
key is enabled. The default setting is . (no quick key). If you don’t assign a Favorite Lists to a quick
key, it will always be scanned unless you turn it off in Select Lists to Monitor. See also Select Lists
to Monitor.
Scroll to the quick key number (0-99 or . for no quick key) and press E/yes to save.
Note: Pressing the rst number of a 2-digit quick key will get you closer, 1 for 10, 2 for 20,
etc., then scroll to second digit.
Set FL Number Tag – This allows you to number a Favorites List so you can access it quickly
from scan hold mode.
The default setting is no number tag. See also Using Number Tags.
Enter the number tag (0-99) and press E/yes to save. Enter a blank for no number tag.
Set FL Startup Key – This allows you to turn on the scanner with the Favorites List enabled for
scan. The default settings are all keys Off.
See also Using Startup Keys.
Scroll to each key (0-9) and press E/yes to enable then press Menu to save.
Use Location Control – This enables Location Control for the Favorites List. The default setting
is Off. See also Understanding Location Control.
Review Avoids – This allows you to review all Avoids for the Favorites List. Temporary Avoids
appear reversed in the display -
.
Scroll to each Avoided channel, Department, or System, and press E/yes to Stop Avoiding.
Stop All Avoiding – This will Stop Avoiding all Channels, Departments, and Systems in the
Favorites List.
At Conrm Delete? Press E/yes or ./no.
Add Current dB Channels – This allows you to add all channels you are currently scanning to
the Favorites List.
At Confirm? Press E/yes or ./no.
Note 1: Any Avoided Channel will not be added.
Note 2: When adding channels from the Full Database, only channels that are inside the set
range, and from the selected Service Types are added.
Note 3: When adding channels from a Favorites List that has ‘Use Location Control’ is set
to Yes, only channels that are inside the set range, and from the selected service types are
added.