Filter
Top Products
To Verify the Status of a Trunk:
1. Access an idle line.
2. Enter the Trunk Verification
from Station access code.
3. Enter the equipment number
of the trunk that you wish to
verify.
To Send a Voice Call:
1. If placing a voice call over an
intercom line, press the
Intercom (ICM) line
appearance key. To place the
call over the prime line, press
the prime line appearance key
(or if your telephone has prime
line preference, simply take
your telephone off-hook).
2. Enter the number of the
station or intercom group
member to receive the voice
call.
3. Press the Voice Calling (VC)
access key.
4. Listen for a burst of tone,
which indicates that the voice
call is in operation.
Display telephones will display “ENTER EQN.”
If the trunk is idle, you will hear dial tone. If the trunk is busy, you will hear
busy tone. Display telephones will also display the busy or idle status of
the verified trunk.
If the verified trunk is idle, the trunk can be used for outgoing call
placement.
VOICE CALLING
Voice Calling allows you to make a verbal announcement over a called
station’s speaker, as an alternative to having the call ring the station. You
can alternate between these two calling options by repeatedly pressing
your station’s Voice Calling access key. Each station is individually
allowed to send and/or receive voice calls. Voice calls can be sent over
prime lines or intercom lines only.
The called station will also receive this tone. (If the called station is not
allowed to receive a voice call, then this tone will not sound.)
PERCEPTION 4000 FEATURE OPERATION
4-50