Filter
Top Products
To Use a System or Group
Speed Calling Number:
1. Press the Speed Calling
—System (SYSD) or Speed
Calling—Group (SC-G)
access key.
. . . or . . .
Enter the Speed
Calling—System or Speed
Calling—Group access code.
2. Enter the desired Speed
Calling index number.
3. If the entered index number
represents only part of the
destination number, dial any
remaining call digits.
Listen for recall dial tone.
If you attempt to access Group Speed Calling and your station does not
belong to a Speed Calling group, you will hear reorder tone.
Each Speed Calling index number represents the placement of a certain
number sequence in the System or Group Speed Calling number listing.
Enter three digits (000 ~ 999) for System Speed Calling, or one digit (0 ~
9) for Group Speed Calling.
The number sequence associated with the Speed Calling index number
will be dialed.
Listen for ringback tone.
The entire number sequence will be dialed. Listen for ringback tone.
The call will proceed as a regular call.
NOTES:
1. You can place a current call on “soft hold” by pressing the
CONF/TRNS key, and then place a call via Speed Calling. To return
to the held call, press the Release (RLS) key.
2. A Speed Calling access code and index number can be assigned to
an Autodial key.
3. While using Speed Calling, you will hear reorder tone if you enter an
invalid Speed Calling access code or index number; if your station is
restricted from accessing the call destination; or if your station is
restricted from the route used for the call.
PERCEPTION 4000 FEATURE OPERATION
4-46