Filter
Top Products
2. Press the CP-L key.
. . . or . . .
Enter the Call Park—Local
access code.
To Park a Call Remotely:
1. Establish a two-way
connection.
2. Press the Call Park—Remote
(CP-R) access key.
. . . or . . .
Press the CONF/TRNS key
and then dial the Call
Park—Remote access code.
3. Dial the directory number of
the line on which the call is to
be parked.
To Retrieve a Call Remotely:
1. Go off-hook to retrieve the
remotely-parked call on the
line provided by your station’s
line preference type.
. . . or . . .
Press an idle line key to
retrieve the parked call on a
line other than that
automatically provided by your
station’s line preference.
2. Press the CP-R key.
You will be connected to the parked call.
When using a CP-L key, the CP-L LED will go out.
The connected party will be placed on “soft hold.”
Listen for recall dial tone.
The dialed directory number can appear on any telephone.
Listen for success tone. The call will now be parked on the dialed line.
If the call is not retrieved within a predetermined time period, the call will
recall the prime line of the station that initiated the park.
The CP-L LED on the station whose prime line is the call park destination
will light solid red and will remain lit while the call is parked. If the line on
which the call is parked is not a prime line on any station (e.g., a logical
line), there will be no indication of the parked call on any station
containing that non-prime line appearance.
PERCEPTION 4000 FEATURE OPERATION
4-14