Filter
Top Products
If your telephone is idle, or if you are activating a feature from the idle
state, an intercom call will ring as a regular call.
If you are involved in a call, the intercom call will ring at a muted level.
Place your current call on “hard hold” by pressing the HOLD key. After
speaking with the intercom caller, you can return to the held caller by
pressing the line key on which your first call is being held.
NOTES:
1. When answering an intercom call, the intercom line must be
manually selected, unless your telephone has ringing line
preference. An intercom line will not be automatically selected by
any other type of line preference.
2. All LED indications associated with an intercom line are the same as
those for any other line type (I-Use, I-Hold, etc.).
3. You can only place an intercom call to a member of your intercom
group. An intercom call can only be answered at your station. Other
intercom group members cannot answer the call via the Call Pickup
feature.
4. An attendant console cannot be accessed via an intercom line and
cannot place calls via an intercom line.
5. If Automatic Answer is activated at your station, you can respond to
intercom calls without lifting the telephone handset.
6. Your station can belong to any number of intercom groups allowed.
Your station will have a separate intercom line key for each intercom
group of which it is a member.
LAST NUMBER REDIAL
You can automatically redial the last number dialed from your telephone,
by using the Last Number Redial access key or code. The number
stored by your telephone for Last Number Redial can consist of up to 24
digits, which can include dialing prefixes such as authorization codes,
trunk access codes, and account codes.
The last number that was successfully dialed from your telephone
(receiving no reorder tone) will be automatically redialed.
To Answer an Intercom Call:
1. Press the ringing ICM line key,
or if your telephone has
ringing line preference, simply
take your telephone off-hook.
To Place a Call via Last Number
Redial:
1. Press the Last Number
Redial (LND) access key.
. . . or . . .
PERCEPTION 4000 FEATURE OPERATION
4-37