Filter
Top Products
To transfer the call without an
announcement, hang up. The
transferred call will ring the
destination party.
To Answer a Waiting Call:
1. Establish a two-way
connection.
2. To access the new call, press
the SWAP access key.
. . . or . . .
Press the CONF/TRNS key,
listen for recall dial tone, and
enter the Swap access code.
3. To alternate between calls,
repeatedly press the SWAP
key or continue to press the
CONF/TRNS key, listen for
recall dial tone, and enter the
Swap access code.
. . . or . . .
station. If the recall is not answered, then after a predetermined time
period, the call may be rerouted to another destination, as programmed
in the system database.
NOTES:
1. Any internal call can be transferred to either another station or a
trunk party. External trunk calls can be transferred to another station
or, if allowed by your system and your telephone, to another trunk
party. A trunk or Least Cost Routing access code can be entered
when transferring a call to an outside party.
2. You cannot transfer an attendant call, a call involving an ancillary
device (dictation machine, etc.), a call involving a party that has
another party on “soft hold,” or a call involving a party that is involved
in a conference.
CALL WAITING
The Call Waiting feature advises you of an incoming call to a line that
you are currently using. The incoming call is automatically camped-on to
your telephone. You can access the new call by using the Swap access
key or code. The Swap key or code can also be used to alternate
between calls.
If a new call arrives and is camped-on to your line, you will hear Call
Waiting tone.
Your current call will be automatically placed on “soft hold” and you will
be connected to the new call.
If desired, you can transfer the new call to another destination by using
the Call Waiting Transfer feature.
Each time, the two calls will be switched.
PERCEPTION 4000 FEATURE OPERATION
4-18