TOA Electronics CP-66 Intercom System User Manual


 
Secretary Transfer and Call Transfer
Tie-line
NP Type
Adoption of the selective function "Transfer" allows rerout-
ing of the call transferred to the secretary back to the
executive's station.
When the secretary answering a call touch dials
Executive's station number
the continuous calling tone sounds at both stations, while
the call is held. The call holding tone is transmitted to
the calling station. If the executive shifts the privacy
switch to the left position, or if he depresses any of the
keys other than the key
or picks up a handset he can talk with the secretary. If
the call held is to then be transferred back to the execu-
tive's station, the secretary is to touch dial , or to hang
up a handset, and the original calling station will be con-
nected to the executive's station.
Secretary Transfer and Call Transfer using Single Digit
Dialing
Adoption of the selective functions "Transfer" and "Single
Digit Dialing" allows simple retransfer of the call transfer-
red to the secretary back to the executive's station.
Touch dial
Confirmation tone
Executive's station number
at the secretary's station in advance. When the call trans-
ferred to the secretary has to be transferred back to the
executive, the secretary simply touch dials
at her station. This sends the continuous calling tone to
both stations, while the call is held. If the call is to be
transferred back to the executive's station, the secretary
touch dials or hangs up a handset.
The calling station will then be connected to the executive's
station.
If there is no answer from the executive, the secretary
touch dials
and the original call is resumed.
Secretary dials
Continuous calling tone
Continuous
calling tone
Holding tone
Holding
Holding tone
Call Transfer
Call Back
Secretary dials
or hangs up a handset
Secretary dials
Call
Executive
or depresses any of the keys
or picks up a handset
Call
Call Transfer
(Executive)
—80—