TOA Electronics CP-66 Intercom System User Manual


 
Single Digit Dialing
Single digit registration
Register in advance as follows:
Confirmation tone (Station number)
Station number
Confirmation tone (Personal number)
Personal number
Confirmation tone (Paging call)
Paging zone
Confirmation tone (All-call paging response)
Confirmation tone (Each function)
Any six digits
Confirmation tone (Each function)
Any five digits
Confirmation tone (Each function)
Any four digits
Confirmation tone (Each function)
Any three digits
Confirmation tone (Each function)
Any two digits
< Single digit dialing >
When required, dial
and the registered number will be called automatically.
Note: 1. To cancel the registration, dial the station number
of the station at which this functions has been
registered.
2. It is also possible to use this function to shorten
the long dial operation.
Example
Combination paging
Single digit
— 28 —
Simply dialing makes the combination
paging instead of dialing
3. Single digit registration is not available from any
substation programmed by No.200 programming,
even if its line is connected with master station.