TOA Electronics CP-66 Intercom System User Manual


 
Selectable First Station Number
The first station number of the system may be selected
from any of the following numbers (Hardwired
station number): 100/200/300/400/500/600/700/
800/900.
The system with Personal Numbers can't use No.
100 ~ 199.
Note.
Station No. 200 programming is required when any
other numbering schedules than standard (No. 200 ~)
are used.
Programmable Station Numbering
This function allows the system to have "Programmable
station numbers'', other than the "Hardwired station
numbers" by programming.
The unprogrammed stations are used as original
hardwired station numbers.
Type of dial operation
With Personal number
Without Personal number
Hardwired
station number
No.200 ~ 455
No.100 ~ 355
Programmable
station number
No.200 ~ 999
No.100 ~ 999
1. Numbering schedules can be changed easily by pro-
gramming in stead of rewiring.
2. Such numbering schedules as 200's, 300's and 900's
can be grouped together for each individual office.
3. Hardwired stations of each paging zone must have
consecutive numbers. To make the programmable
station numbers inconsecutive, use this function.
4. This function requires No.200 programming. See Installa-
tion Instructions for EXES-6000 CP unit.
< Example >
Hardwired
station number
Programmable
station number
Department 1
Department 2
Dialing
Exchange
Programmable station
No. 203
Circuit No. 201
(Hardwired station
number)
Circuit No. 203
(Hardwired station
number)
Programmable station
No. 201
5. People operating the intercom stations need not worry
about the Hardwired station numbers. Note, however,
that the hardwired station numbers are used to program
all the setup data of each function into the exchange
through No.200 programming.
Hardwired
station number
Programmable
station number
Hardwired
station number
Programmable
station number
Station
paging zone
—51—