TOA Electronics CP-66 Intercom System User Manual


 
Single Digit Dialing
Single digit registration
Register in advance as follows:
Confirmation tone (Station number)
Confirmation tone (Personal number)
Confirmation tone (Paging call)
Confirmation tone (All-call paging response)
Confirmation tone (Each function)
Confirmation tone (Each function)
Confirmation tone (Each function)
Confirmation tone (Each function)
Confirmation tone (Each function)
< Single digit dialing >
When required, dial
and the registered number will be called automatically.
Note: 1. To cancel the registration, dial the station number
of the station at which this function has been
registered.
2. It is also possible to use this function to shorten
the long dial operation.
Example.
Combination paging
Single digit
Simply dialing makes the combination
paging instead of dialing
3. Single digit registration is not available from any
substation programmed by No.200 programming,
even if its line is connected with master station.
Tie-line
Station number
Personal number
Paging zone
Any six digits
Any five digits
Any four digits
Any three digits
Any two digits
—71—