Filter
Top Products
28 Section 2C: Inserting and Removing the Card
ⅷ The Unplug and Eject Hardware icon appears in the system tray, if it is not
already displayed for another card (and unless the feature has been disabled).
The card is powered as soon as you insert it.
Removing the Card (Windows)
To remove the card from your Windows computer:
1. Exit Sprint Connection Manager if it is open (page 58).
2. Click the Unplug and Eject Hardware icon in the system tray:
3. Click the entry for “NEC PCI to USB Open Host Controller” or “Standard Enhanced
PCI to USB Host Controller.”
4. If a dialog box appears notifying you that it is safe to remove the card, click
OK, or click the Close button ( ).
5. Use your computer’s ExpressCard or PC Card ejector to eject the card from the
slot.
6. If you’re using your card (with the ExpressCard to PC Card adapter) in a
PC Card slot, remove the card and adapter from your computer’s slot by
gripping both sides of the adapter and pulling straight out.
– or –
IMPORTANT!
When inserting or removing your card, always grip the card by its sides,
as this prevents damage to the card.
Windows Vista Windows XP Windows 2000
Windows Vista Windows XP Windows 2000