Filter
Top Products
E48
MULTI-HANDSET
FEATURES
Call Transfer Feature
1 During a call, press INTCM/HOLD on the handset.
2 Select a handset to transfer the call to within
10 seconds.
To select the handset, press VOL/▲ or VOL/▼,
and then press the OK soft key. If you select
All
,
all other handsets will be paged.
The call will automatically be placed on hold, and an intercom tone
sounds.
To cancel the transfer, press the CANCEL soft key, and then TALK/FLASH or
SPEAKER on the initiating handset.
3 To answer the page on a receiving handset, press TALK/FLASH,
INTCM/HOLD, or the ANSWER soft key. If Anykey Answer is enabled,
pressing a number key, /TONE/ , or #/ will answer the page.
If Automatic Talk is enabled, you can answer the page by simply picking
up the handset.
4 To speak to the caller, press TALK/FLASH on the receiving handset.
• If the party is busy or out of range, the handset returns to standby mode.
• If you receive an outside/intercom call or page while selecting the other handset,
the operation will be cancelled.
• If the party does not answer within one minute, the operation is cancelled.
Press TALK/FLASH or SPEAKER to return to the caller.
• During an intercom call, if you receive a call, you will hear a ringer tone from the
earpiece. Press TALK/FLASH on either handset to answer the call.
Notes:
Hold,to transfer
Handset #2
Handset #3
BACK
DELETE
OK
UP800DH(CLT-D5880) OM 1/24/06 3:39 PM Page 48