Sanyo CLT-D5880 Cordless Telephone User Manual


 
E25
BASICS
Handset On the Cradle
Pick up the handset
(Automatic Talk is: on) or
pick up the handset and
press TALK/FLASH
(Automatic Talk is: off).
Handset Off the Cradle
Press any number key,
/TONE/ , or #/ (When
Anykey Answer is on), or
press TALK/FLASH.
Handset Off the Cradle
1) Press TALK/FLASH.
2) Listen for the dial tone.
3) Dial the number.
OR
Dial the number, and then
press TALK/FLASH.
Normal Conversation Hands-free Conversation
To answer a
call
To make a
call
To hang up
To enter a
pause within
the dialing
sequence
Handset Off the Cradle
Press SPEAKER.
Handset Off the Cradle
1) Press SPEAKER.
2) Listen for the dial tone.
3) Dial the number.
OR
Dial the number, and then
press SPEAKER.
Press END or return the handset to the cradle.
From the Handset
When you dial the number in standby mode, press the PAUSE
soft key.
P
appears in the display, which represents a pause.
To set "Auto Talk", see page E18 or to set "Anykey Answer", see page E18.
The handset microphone is located at the bottom of the handset (see "Controls and
Functions" on page E2). Position yourself as near to the handset as possible and speak
clearly.
If the line is in use by another handset(s), "
Line In Use
" appears in the display of all
registered handsets that are not in use.
Notes:
UP800DH(CLT-D5880) OM 1/24/06 3:38 PM Page 25