Sanyo CLT-D5880 Cordless Telephone User Manual


 
E38
DIRECTORY
If you have two handsets, Copy Phonebook allows you to transfer stored
phonebook locations from handset to handset so you don't have to manually
re-enter names and numbers. You can transfer one memory (phonebook
location) at a time, or all memory locations at once.
1 When the phone is in standby mode, press .
2 Press the COPY soft key.
3 Press VOL/ or VOL/, to select the handset you
want transfer the phonebook locations and then
press the OK soft key.
4 Press VOL/ or VOL/ to select
One Memory
or
All
Memories:
and then press the OK soft key.
If you select All Memories,
Are you sure?
appears
on the display screen.
Press VOL/ to select
Yes
, and then press the OK soft key.
If you select One Memory, press VOL/or VOL/,
or the number key (2-9 and 0) to select the
phonebook location you want to export and then
press the COPY soft key.
5 The phonebook locations will be transferred to the
handset.
Copying
and the receiving handset name
appear. When the transfer is completed
Done!
appears on the handset.
Copying Phonebook Locations (CLT-D5882/CLT-D5883)
To which unit?
Handset #2
Handset #3
BACK
DELETE
OK
Copy Phonebook
One Memory
All Memories:xxx
BACK
DELETE
OK
To select
phonebook
press [A-Z/ / ]
BACK
Copying
>> Handset #2
CANCEL
If the memory location on the receiving handset is full, and cannot store the phonebook
locations, you will hear a beep.
If an error occurs, the phonebook locations transferred before the error were stored in
the receiving handset.
Notes:
UP800DH(CLT-D5880) OM 1/24/06 3:39 PM Page 38