Sanyo CLT-D5880 Cordless Telephone User Manual


 
E21
USING
THE INTERFACE
Global Setup
If you change one of the global settings, you change that setting for all
registered handsets. Only one handset can change global settings at a time.
Setting Day and Time
Day & Time sets the day and time of your display.
1 Press the MENU soft key. Select the Global Setup
menu, and then the Day & Time submenu option.
2 Press VOL/ or VOL/ to select the day of the
week, and then the
//
soft key.
3 Press VOL/ or VOL/ to set hour, and then press the
//
soft key.
4 Press VOL/ or VOL/ to set minute, and then press the
//
soft key.
5 Press VOL/ or VOL/ to choose
AM
or
PM
, and then press the SAVE soft
key. You will hear a confirmation tone.
Setting CIDCW (Caller ID on Call Waiting)
Caller ID on Call Waiting (CIDCW) displays the name and number of an
incoming call while you are on the line. Call Waiting Deluxe (CWDX) allows
you to handle call waiting calls in seven different ways.
1 Press the MENU soft key. Select the Global Setup
menu, and then the CIDCW submenu.
2 Press VOL/ or VOL/ to select
CW On
/
CWDX On
,
CW On
/
CWDX Off
,
or
CW Off
/
CWDX Off
, and then press the OK soft key. You will hear a
confirmation tone.
Day & Time
MON 12:00 AM
[ / ]
BACK SAVE
CIDCW
CW On /CWDX On
CW On /CWDX Off
BACK
DELETE
OK
For setting the Day and Time, the idle time-out is extended to 2 minutes.
Note:
UP800DH(CLT-D5880) OM 1/24/06 3:38 PM Page 21