Sanyo CLT-D5880 Cordless Telephone User Manual


 
E15
USING
THE INTERFACE
Below are some tips for using the software interface on your phone.
Press the MENU soft key to access the main menu.
Use VOL/ and VOL/ to scroll through options.
Press the OK soft key to make a selection.
Press the BACK soft key to return to the previous
screen.
Press END to exit the menu.
Walkie-Talkie Mode
In Walkie-Talkie mode, a pair of handsets can function as two-way radios.
Walkie-Talkie mode allows two handsets to communicate with each other
without the base unit or a telephone line. Use them at sporting events or
while shopping to stay in contact with family members or friends. You must
set both handsets to Walkie-Talkie mode to activate this feature.
Using Walkie-Talkie Mode (for CLT-D5882/CLT-D5883)
1 Press the MENU soft key and select the DirectLink
Mode menu.
To enter DirectLink mode press
[ENTER]
appears.
2 Press the ENTER soft key to enter Walkie-Talkie mode. You will hear a
confirmation tone, and
DirectLink Mode Complete
appears.
3 To return to normal mode, press the CANCEL soft key and then the OK soft
key, or return the handset to the cradle.
Setting Menu Options
DirectLink Mode
Room Monitor
Handset Setup
BACK
BACK
OK
To enter
DirectLink mode
press [ENTER]
BACK
BACK
ENTER
You must have at least two handsets to use Walkie-Talkie mode.
Note:
UP800DH(CLT-D5880) OM 1/24/06 3:38 PM Page 15