Filter
Top Products
E16
USING
THE INTERFACE
Room/Baby Monitor
This feature allows you to monitor
sounds in another room. Place a
handset in the room you wish to
monitor; it will function as a
microphone. A second handset
can be set to function as a remote
speaker, allowing you to monitor
sounds in the room.
Using Room/Baby Monitor
1 Press the MENU soft key and select the Room Monitor menu.
To Room Monitor
appears.
2 Select the handset you want to monitor by using VOL/▲ or VOL/▼.
3 Press the OK soft key.
RoomMonitor
appears, and you hear sounds in the
room where the handset is installed.
4 To turn off the Room Monitor, press the END soft key, or END.
During room monitor, if you receive a call, you will hear beeps from the
earpiece or speaker. Press TALK/FLASH to answer the call.
RoomMonitor
Handset #2
END
• This feature only works when the handset(s) is within the range of the base.
• You must have at least two handsets to use Room/Baby Monitor.
Notes:
UP800DH(CLT-D5880) OM 1/24/06 3:38 PM Page 16