Filter
Top Products
12
Getting Started
13
Getting Started
Installing Handset Battery
2. Remove old battery (if any), then plug the battery connector
into the socket shown below, and insert the battery.
The handset uses the rechargeable Ni-MH battery sup-
plied.
1. Slide the battery cover in the direction of the arrow, then
lift it off.
3. Replace the battery cover. Make sure that the cover is
properly aligned.
4. Slide the cover up until it snaps shut.
Notes:
• The battery needs to be replaced if it does not recover its
full storage capacity after re c h a rging.
• When replacing battery, only use SAMSUNG-approved
b a t t e ry. For details, see ‘Specifications’ on page 65 or ask
your nearest service center.