Filter
Top Products
44
Ring
45
Ring
Adjusting Ring Volume (Menu 4-2)
1. In the Standby mode, press the Menu soft key.
2. Press the soft key repeatedly until Ring appears, then
press the Select soft key.
3. Press the soft key repeatedly until Ring Volume
appears, then press the Select soft key. The current Ring
Volume setting appears.
4. Press the or key on the side of the phone to choose
the volume level you want.
Each time you press or key, the handset sounds the
ring with the level you have chosen.
The ring volume is displayed as bars in the LCD window.
The more bars you see, the louder the volume is.
5. Press the OK soft key to confirm the setting.
This option allows you to indicate how you wish to be
informed of any incoming calls. The following options are
available.
1. In the Standby mode, press the Menu soft key.
2. Press the soft key repeatedly until Ring appears, then
press the Select soft key.
3. Press the soft key repeatedly until Alert Typeappears,
then press the Select soft key.
The Alert type options are displayed:
• Ring: The handset rings using the ring tone selected via
the ‘Ring Tone’ menu.
• Vibra + Ring: The handset vibrates first, then rings.
• Vibration: The handset vibrates but does not ring.
4. Press the soft key to select the alert type, then press
the OK soft key.
N o t e s :
• Your handset will ring when it is on the base unit, even if it
has been placed in vibration mode.
• To switch to vibration mode quickly, press and hold the
key in the Standby mode. To resume the handset’s alert
type, press and hold the key again in the Standby
mode. Refer to page 26.
Choosing Alert Type (Menu 4-3)