Filter
Top Products
Caller ID
21
4. Press
VOL to move the pointer to Yes.
5. Press
REMOTE/SELECT or CH/DELETE.
6. You hear a confirmation tone. After about two
seconds, the handset returns to standby mode.
CALLER ID
You must subscribe to Caller ID service to use
this feature.
When the telephone rings, the Caller ID feature
allows you to view the caller’s name and phone
number on the display before you answer the
phone.
The handset displays the phone number of the
incoming call, the name, and time. Additionally, you
can dial the displayed number and store the
information for memory dialing. Make sure you have
turned on the Caller ID on Call Waiting feature.
(See “Changing the Auto Talk and CIDCW” on page
9.)
WHEN THE TELEPHONE RINGS
1. When the Caller ID message is received, the
display shows the caller’s phone number along
with the date and time. The incoming call
information is stored in the Caller ID record. If
the Caller ID service includes the caller’s name,
the caller’s name appears on the display (up to
15 letters).Ô
You may receive any one of the following
messages:
Message Display
When invalid data is
received
“Incomplete Data”
When a private name
is received
“Private Name”
Ô NOTES Ô
• If you answer a call
before the Caller ID
message is received
(Example: before the
second ring), the Caller
ID message will not
appear.
• When the call is
received via a telephone
company that does not
offer Caller ID service,
the caller’s phone
number and name do
not appear.
(This includes
international calls.)
• When the call is via a
private branch exchange
(PBX), the caller’s phone
number and name may
not appear.
• Data errors appear as “ ”.
43-3857.book Page 21 Wednesday, February 18, 2004 12:40 PM