Filter
Top Products
Memory Dialing
18
The screen appears with the memory location
number that you have selected in the display.
3. Press
MEM or REMOTE/SELECT.
4. Press VOL or VOL to select Edit
MemoryXX
. Then press MEM or REMOTE/
SELECT
.
Store Name is displayed. The cursor flashes
indicating that the display is ready for the name
to be edited. When a name has not been
stored, the cursor appears at the beginning of
the second line.
5. Use the number keys,
/TONE/<, #/>, or CH/
DELETE
to edit the name. (See “Storing Phone
Numbers and Names” on page 13.) To edit only
the phone number, skip this step.
6. Press
MEM or REMOTE/SELECT.
The cursor flashes indicating that the display is
ready for the number to be edited.
7. Use the number keys, /TONE/<, #/>, PAUSE/
REDIAL
or CH/DELETE to edit the phone
number.
The phone number cannot exceed 20 digits.
If you don’t want to change the phone number,
skip this step.
8. Press MEM or REMOTE/SELECT. If you changed
either name or phone number, a confirmation
display shows up. If it is correct, press
VOL
to select Yes and press REMOTE/SELECT. Yo u
hear a confirmation tone. The memory storage
is complete.
For example, if you store a name and number
into memory location number 01, the display
shows
Memory01 Stored. After about two
seconds, Select Memory screen is displayed.
9. Press
END to return to standby mode.
43-3857.book Page 18 Wednesday, February 18, 2004 12:40 PM