Filter
Top Products
Memory Dialing
19
ERASING A STORED NAME AND
P
HONE NUMBER
1. Press MEM. Select Memory is displayed.
2. Press
VOL or VOL, or enter a number (0-
9) to select the memory location you would like
to erase.
3. Press
MEM or REMOTE/SELECT.
The screen appears with the memory location
number that you have selected in the display.
4. Press
MEM or REMOTE/SELECT.
5. Press
VOL to move the pointer down to
Delete MemoryXX.
6. Press
MEM or REMOTE/SELECT. The
confirmation screen appears.
7. Press
VOL to move the pointer to Yes.
8. Press
REMOTE/SELECT or CH/DELETE. You
hear a confirmation tone.
9. After about two seconds the display returns to the
Select Memory screen. You may delete the
information in another memory location (return to
step 2) or press
END to return to standby mode.
TESTING STORED EMERGENCY
N
UMBERS
If you store an emergency service’s number (police
department, fire department, ambulance) and you
choose to test the stored number, make the test call
during the late evening or early morning hours to
avoid peak demand periods. Also, remain on the
line to explain the reason for your call.
43-3857.book Page 19 Wednesday, February 18, 2004 12:40 PM